The ZCSX-50C Smart Shore (Rubber) Hardness Tester Calibration Device is a hardness tester calibration device developed and produced by Wuxi Zice Tuoxin Metrology Technology in accordance with the calibration specifications of JJG304-2003 "A-type Shore Hardness Tester Calibration Device", JJG 1039-2008 "D-type Shore Hardness Tester", and JJF 1312-2011 "AO type Shore Hardness Tester". The ZCSX-50C intelligent Shore (rubber) hardness tester calibration device is suitable for various specifications of A/D/O Shore hardness testers.

1、 Technical parameters

1. Measurement range: Type A 0-10N, 0-1000HA,
D-type 8-50N, 0-1000HD,
AO type 0-10N, 0-1000HAO;
2. Instrument resolution: hardness value 0.1HA HD AO/force value 0.1mN
3. Indication error:
Type A ≤± 8mN, hardness value ≤± 0.1HA
D-type ≤± 50mN, hardness value ≤± 0.1HD.
AO type ≤± 8mN, hardness value ≤± 0.1HAO.
Instrument resolution: hardness value of 0.1HA (HD), force value of lmN.
4. Maximum travel of calibration table: 100mm.
5. It can display force values and hardness, and dual range sensors can measure A-type, D-type, and O-type Shore hardness testers respectively.
6. Special measuring blocks 2.54 (-0.004,0) mm, 2.52 (-0.004,0) mm, 2.46 (0,+0.004) mm, 2.48 (0,+0.004) mm, 2.0 (-0.004,+0.004) mm, 1.25 (-0.004,+0.004) mm, flat steel plate (1200-1300) HV.
2、 Performance characteristics:
1. The dedicated measuring block meets the requirements of JJG304-2003 "A-type Shore Hardness Tester", JJG1039-2008 "D-type Shore Hardness Tester", and JJF 1312-2011 "AO type Shore Hardness Tester".
2. Unit display: mN, N, kN, MN, kgf, gf, tf, kg, g, mg, HA, HD, HO can be switched freely. Customizable conversion coefficient.
3. Sensor configuration: Two sensors with different measurement ranges can be used to measure A-type, D-type, and AO type Shore hardness testers.
4. The four jaw fixture can fix various types of Shore hardness testers
5. Real time display of real-time curves.
6. Sampling frequency: greater than 1500Hz; (can be set as needed)
7. Embedded system: Linux operating system.
8. Display screen: 4.3-inch high-definition touch screen (capacitive screen)
9. Power supply: 5VDC/2A, built-in lithium battery, standard TypeC charging port, can work continuously for 8 hours and supports power bank supply.
10. The instrument comes with built-in measurement of environmental temperature, humidity, and atmospheric pressure.
11. The Ethernet interface can transmit measurement data to the computer.
12. Equipped with GPS function, the instrument picks up corresponding test information based on GPS latitude and longitude coordinates, and the LCD screen will display specific information of the testing machine such as unit name, instrument name, manufacturer, calibration date, etc.
The 13.4G transmission function can transfer measurement data to the cloud and transmit it in real-time to the PC for display and analysis, and generate certificates and original records.
14. Dimensions: 150mm * 112mm * 60mm